Afinia DLP-2100 Overview
Print & Finish Labels Inline
The Afinia DLP-2100 can print, die-cut, and fully finish labels at up to 60 feet per minute (~18 meters per minute). This full-featured Memjet-powered digital label press (digital label printer + digital inline finisher) is capable of laminating, die-cutting, matrix-removal, slitting and rewinding to finished rolls that are ready for product application.
Afinia’s DLP-2100 Digital Label Press is perfect for higher-volume label consumers that require repeat label jobs and a small variety of predictable sizes. Printing and finishing labels in house with a digital label press helps to simplify inventory, create flexibility and reduce costs.
Print shops also use the Afinia DLP-2100 AS A SUPPLEMENT to larger, more expensive equipment such as indigo or flexo presses or to add the capability to produce labels in-house—allowing for faster turnaround, better quality control, and more profitability on lower-volume label runs.
- Fast & affordable flexible steel dies
- Very fast finishing (12 IPS)
- Memjet-powered L901 included
- Best for repeat jobs, blank labels
The DLP-2100 is able to accommodate a massive roll of material (17.3 inches or 440 mm outside diameter), which drastically reduces stock cost from converters, and greatly simplifies operation by avoiding frequent roll changeovers.
A re-registering magnetic cylinder uses easily-swappable flexible steel dies that are low in cost and can be created quickly. These dies, combined with servo-controlled motors, allow for pinpoint cutting accuracy at high speeds, even with perforations. In addition to inline print applications, the DLP-2100 can be used to convert blank labels.
High output for large brands and print shops
With the L901 Digital Label Printer inline, the DLP-2100 can produce more than 25,000 full-color 3×4-inch labels per hour. For larger brands, this makes it ideal for bringing label production in house. Print shops can offload their smaller label runs, freeing up large format presses while reducing costs and setup times. Eliminating the need to outsource labels results in faster turnaround times, greater control and flexibility, and thousands of dollars saved.
The integrated L901’s print engine makes printhead maintenance possible with the web intact, allowing for uninterrupted production. In addition, it delivers industry-leading low ink costs via five (CMYKK) high-capacity cartridges.
|Print Speed||30 ft/min. (9m)|
|Print Quality||1600 DPI full-color output|
|Max. Web Width||9.65″ (245 mm)|
|Lateral Paper Adjustment||0.5″ (12 mm)|
|Core Sizes||3″ (76 mm)|
|Max. Laminate OD||11″ (280 mm)|
|Laminate||Economical, self-wound and supported laminate (on a liner). Liner removal included for use with high quality, liner-supported laminate|
|Maximum Die-cutting Width||9″ (230 mm)|
|Maximum Die-cutting Length||12″ (304.8 mm)|
|Cutting Dies||Flexible steel – Recommended total die length 7″ (177 mm) to 12″ (304.8 mm)|
|Registration Sensor Adjustment||9″ (230 mm) x 12″ (304.8 mm)|
|Sensor Mark||0.2″ x 0.2″ (5 mm x 5 mm)|
|Maximum Finished Label Rewind||11″ (280 mm)|
|Maximum Waste Matrix Rewind||11.8″ (300 mm)|
|Razor Slitter Assembly||6 knives|
|Razor Slitter Lateral Adjustment||0.47″ (12 mm)|
|Media Capacity||Print and finish (using L801 print engine’s enclosed unwinder): 6″ wide to 8.5″ wide, 8″ Max OD on a 3″ core. • Print and finish using optional external unwinder: Up to 19.68″ (500 mm) OD on a 3″ core|
|Dimensions||92″ (233.7 cm) L x 59″ (149.9 cm) H x 30″ (76.2 cm) W|
|Frame||0.4″ (10 mm) solid aluminum|
|Safety Sensors||Magnetic lid x 2|
|Loop||Photoelectric distance sensor|
|Power||110V – 240V adjustable, 7 Amps|
|Speed||Max 7.87″/sec (200 mm/sec) re-registering or 140 ft/min full rotary for blank labels|
|Weight||420 lbs (190 kg)|
|Motors||2, 400 W / 90 W|
|Control||PCB. Inverter, Encoder|